Kick starting the AVL Bullet

Kick starting the AVL Bullet

Kick starting the old Points ignition CI engine is a beauty.
But the newer avl500, Machismos and Thunderbirds- Kick starting is a nightmare for some. Harder kicker on these TCI avl machines is a known issue. One needs to literally stand up on the kicker and risk more wear and tear to leg joints than that to the bike parts. Right foot slipping of the licker lever and getting jammed between the lever and the foot peg giving the toe a one of a kind strike and tissue damage is one major risk.

Let me share an observation to make kick starting a smooth exercise. This basically depends on the effective use of the decompression. The decomp in TCI avl bullets are said to be ineffective and useless. It doesn’t decompress at all, the lever doesn’t even get pressed… few myths.

Try this-
Press the decomp lever. Yes, it’s obvious that the lever is kind of stuck and doesn’t move. Keeping your thumb pressed on the decomp lever, push down the kicker lever gently. You might feel that the kicker also rejects with the normal tension initially. What I do is stand up from the seat and apply the body weight on the kicker. Then, it gently goes down relieving the decompresser too. Now the depcomp is applied fully and the kicker is totally free. Now release the comp lever and kick start smoothly as in a points CI bullet. The gentlest push on the kicker and the engine fires up.

3 comments:

Yunus Khan said...

Jobin,
Good article, I have a new Mach500 and the re-bound on the kicker is a nightmare at times.

Once I decompress twice or thrice, I would generally be able to start an older bullet, but what about the mach500.. I'm not sure decomp more than3-4 times really helps here...

What do I need to really do to kick start the bike early in the colder mornings of KA-05?
Any ideas?

Jo said...

Follow the procedure of proper decompression and kick start. Thats the only way

Anonymous said...

The older bullet, if maintained weel could be 'kicked' with your left hand. :)